OEM / ODM factory since 2009
UniCues manufactures low-deflection carbon pool cues and cue sticks for distributors, billiard clubs and private-label brands. Factory-direct pricing, 0.1 mm tolerance on every taper, and full customization from tip to butt cap.
Audited, tested and trusted
Why UniCues
Every cue leaves our line measured, weighed and hit-tested. These are the manufacturing decisions that make a UniCues cue feel different in the hand — and keep your brand ahead of the competition.
40T aerospace-grade carbon, cured at 130 °C with a hollow front end. Deflection drops by up to 18% versus maple shafts, so aiming stays honest on long shots.
CNC tapering holds ±0.1 mm across a 29 mm pro taper. No ridges, no dead spots — a shaft that stays straight after 5,000 hits.
Your logo laser-etched on the butt cap, custom wrap, joint collar, ringwork and retail packaging. From 20 pieces per model.
Wood moisture check, straightness dial gauge, weight balance, joint torque, tip hardness and a 30-hit bench test before packing.
Digitized specs and a locked bill of materials mean re-orders match the sample you approved — down to the gram.
Individual hard case or bulk carton, DDP/FOB/CIF terms, and door-to-door shipping to 60+ countries with full documentation.
Product range
Four production platforms cover the whole retail shelf: carbon performance, tournament maple, and dedicated break/jump cues. Mix models inside one container to hit your MOQ faster.
UC-CP12512.5 mm low-deflection carbon shaft
Our best-selling performance cue. A hollow 40T carbon shaft with a 29 mm pro taper delivers an honest hit with up to 18% less deflection, while the linen-wrapped butt keeps the feel familiar for players moving up from maple.
UC-CE11811.8 mm 40T carbon shaft, radial joint
The tournament build. A slimmer 11.8 mm tip and a longer 30 mm pro taper give precise cue-ball control for players who work the ball rather than power it. Three-piece construction keeps the balance forward and the hit quiet.
UC-MC130Hard rock maple, 13 mm, stainless joint
The dependable house cue. Kiln-dried hard rock maple at 6–8% moisture, a 13 mm tip and a 5/16×18 stainless joint — built to survive rental racks and still roll straight after years of use.
UC-BJ13013 mm phenolic tip, 3-piece break/jump
A dedicated break and jump platform. The phenolic tip transfers energy with almost no loss, while the carbon-reinforced butt and forward balance keep the cue steady through a full-power break.
Technical breakdown
This is the anatomy of a UniCues carbon cue. All dimensions can be adjusted to your market — from a 11.8 mm snooker-style tip to a 13 mm American pool cue profile.
Hover or tap a numbered part to read its specification.
Applications
From a 40-table pool hall to a national retail chain, our production slots adapt to the volumes and margins of each channel.
House cues with reinforced ferrules and high-impact butts that survive daily rental use.
Retail-ready packaging, barcodes, hang tags and mixed-model cartons for faster shelf turnover.
Full ODM: your design language applied to shaft graphics, joint rings, wrap and case artwork.
Uniform spec batches for coaching programs, plus replacement shafts and tips in bulk.
Manufacturing
Four controlled stages, one continuous quality record. Every batch keeps a traceable sample so your next re-order matches exactly.
Kiln-dried hard rock maple at 6–8% moisture, and 40T carbon prepreg stored at −18 °C.
CNC turning and tapering, radial pin installation, and a 72-hour straightness rest.
Joint facing, wrap application, 6 coats of UV-cured finish, then hand-polishing.
Dial-gauge straightness, weight sorting, 30-hit bench test, then individual hard case.
OEM / ODM
Send a sketch, a reference cue or just a target price — our engineering team returns a CAD drawing and a physical sample within 15 days.
Buyer questions
Still unsure about a detail? Write to us and an export manager will reply within one business day.
Stock models start at 20 pieces per model. Custom logo engraving applies from 30 pieces, and a fully custom private-label design starts at 100 pieces. Mixed models can be combined in one order to reach the MOQ.
Yes. Sample cues ship in 3–7 days and the sample cost is refunded against your first bulk order of 50 pieces or more. For qualified distributors we offer one free sample with freight collected.
Our shafts are available with Radial, 5/16×18, 3/8×10 and Uni-Loc joints, so they fit most mainstream butts. Send us the joint dimensions and we will confirm compatibility before production.
30% deposit with the balance against the bill of lading. We accept T/T, Alibaba Trade Assurance and PayPal for samples. FOB Ningbo/Shenzhen, CIF, or DDP door-to-door are all available.
Every order keeps a sealed reference sample and a digitized spec sheet in our system. Re-orders are produced against that record, and each shipment includes a QC report with straightness and weight data.
Request a quote
Share your target model, quantity and market. You will get factory-direct pricing, a spec sheet and lead time within one business day.
Phone / WhatsApp
+86 138 0120 2918Working hours
Mon–Sat, 08:30–18:00 (GMT+8)
Response time
Within 1 business day
Factory
Billiard Industrial Park, Taizhou, Zhejiang, China
Prefer email?
Send your RFQ with drawings or reference photos to info@unicues.com